|
Schumacher PI-750 Power Inverter, 10/15 VDC Input, 110/128 V Output
Convert 12 VDC to 115 VAC instantly wherever and whenever needed. Built-in, high-speed cooling fan helps keep the unit cool. On/Off switch and LED Indicator. 750 W, with 1500 W peak surge power. Heavy duty clamps connect directly to vehicle battery. Used for running computers, faxes, cell phones, lights, power tools, TVs, VCRs, stereos, radios, CD players, blenders and portable vacuums in cars, trucks, boats, SUVs and RVs
Product Details
Dimensions:14.13 in L x 4 in W x 6.5 in H
Efficiency:85 %
Includes:Instruction Manual
Input Voltage:10/15 VDC
Output Voltage:110/128 V
Output Wave Form:Sine
Features
Built-in, high-speed cooling fan
Has on/off button and LED indicator
Heavy-duty clamps connect directly to vehicle battery
View Details
|
8074288 |
Schumacher PI-750 Power Inverter, 10/15 VDC Input, 110/128 V Output |
2 |
84.99 |
/ EA |
PI-750 |
|
|
Schumacher XI41B Power Inverter, 10/15 VDC Input, 110/125 V Output
Convert 12 VDC to 115 VAC instantly wherever and whenever needed. Built-in, high-speed cooling fan helps keep the unit cool. On/Off switch and LED Indicator. 410 W continuous, 820 W peak surge power. 12 V cigarette lighter/accessory plug or clamps to battery.
Product Details
Dimensions:9.63 in L x 3 in W x 7-1/2 in H
Efficiency:85 %
Includes:(1) Clamp Adapter (1) DC Adapter (1) Owners Manual (2) Replacement Fuses
Input Voltage:10/15 VDC
Output Voltage:110/125 V
Output Wave Form:Sine
Features
Converts vehicle power to 120 VAC household power
Has on/off button and LED indicator
Surge protection, protects against damaging current fluctuations
Thermal protection, unit shuts down if operating temperature is excessive
Built-in, high-speed cooling fan
Features a low battery alarm
Easy-to-use, plugs into vehicle's accessory outlet or connects directly to battery with clamps
Features a 2 A USB port, 2X faster
View Details
|
9388984 |
Schumacher XI41B Power Inverter, 10/15 VDC Input, 110/125 V Output |
1 |
55.99 |
/ EA |
XI41B |
|
|
Battery/Trickle Charger, 6V - 2A/4A, 12V - 2A/4A
This portable and easy to use battery/trickle charger can charge both a 6-volt and/or a 12-volt battery at 2 amps and 4 amps charging capability. Ideal for keeping batteries charged while in storage. Features a digital LED screen that displays charging status and built in safety features. Safety features include; short circuit protection, overheat protection, spark-proof protection and an auto on-off circuit.
SPECIFICATIONS
ETL certified
Voltage: 6-volts and 12-volts
Spark proof for safe operation
Active Charging Indicator: Cycles between volts, amps and battery percent
Normal and winter mode charging options
Suitable for Absorbed Glass Mat (AGM), GEL and standard (STD) batteries
Motorcycle and vehicle mode charging options
Charger will enter repair mode if a rapid drop in voltage is detected
Micro-processor smart technology
9 Stage charging process that diagnoses and maintains battery to minimize charge time and maximize battery life
Digital LED screen that displays charging status
Short circuit protection, overheat protection, spark-proof protection and auto on-off circuit safety features
GLOSSARY OF TERMS
ETL certified: This product is compliant with North American safety standards.
Absorbed Glass Mat (AGM) battery: Uses a glass mat to absorb the electrolyte. These batteries are sealed (vs. flooded), resistant to vibration, non-spillable and maintenance-free.
GEL battery: Gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one-way valves to reduce gassing.
Light-emitting diode (LED): LED lights typically last longer than incandescent lights and are more efficient than most fluorescent lights.
View Details
|
F52735 |
Battery/Trickle Charger, 6V - 2A/4A, 12V - 2A/4A |
2 |
49.99 |
/ EA |
52735 |
|
|
Battery Charger, 6V at 2, 10, and 20 AMPs / 12V at 2, 10, 20, and 100 AMPs Start
Portable and easy to use! This battery/trickle charger is also commonly referred to as a "bench charger." Features LED indicators and button controls for easy reading and accuracy. It can charge both a 6-volt and/or a 12-volt battery at 2 amps (trickle), 10 amps (standard) and 20 amps (quick charge). At 12-volts, this bench charger also has a 100 amp Engine Start charging capability. Using the 100 amps emergency start setting is powerful enough to bring cars, SUVs and small trucks back to life!
SPECIFICATIONS
ETL certified
Recessed control panel protects against accidental setting changes. Features LED indicators and button controls for easy reading and accuracy.
Voltage: 6-volts and 12-volts
Spark proof for safe operation
Operation: 6-volt and/or a 12-volt battery at 2 amps (trickle), 10 amps (standard) and 20 amps (quick charge). At 12-volts, this bench charger also has a 100 amp Engine Start charging capability.
Suitable for Absorbed Glass Mat (AGM), GEL and standard (STD) batteries
Automatic charge cycle functionality switches to float mode after fully charging the battery
Short circuit, overheat and reverse polarity protection will not operate if clamps are reversed
Charger will enter repair mode if a rapid drop in voltage is detected
Easy to use! An error notification will light up if a bad connection is detected
13.6-Volt Power Supply Mode: Provides DC power supply for powering any 12-volt device (e.g., a tire inflator) or as a memory retainer when replacing a battery
Active Charging Indicator: Cycles between volts, amps and battery percent
Auto Amperage Detection: Detects best amperage (cycling between trickle and quick or vice-versa) based on battery condition
Wrap cleats provide convenient cord storage
GLOSSARY OF TERMS
ETL certified: This product is compliant with North American safety standards.
Absorbed Glass Mat (AGM) battery: Use a glass mat to absorb the electrolyte. These batteries are sealed (vs. flooded), resistant to vibration, non-spillable and maintenance-free.
GEL battery: Gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one-way valves to reduce gassing.
Light-emitting diode (LED): LED lights typically last longer than incandescent lights and are more efficient than most fluorescent lights.
View Details
|
F52750 |
Battery Charger, 6V at 2, 10, and 20 AMPs / 12V at 2, 10, 20, and 100 AMPs Start |
2 |
154.99 |
/ EA |
52750 |
|
|
Battery Charger, 6V at 2 and 10 AMPs / 12V at 2, 10, 40, and 200 AMPs Start
Portable and easy to use! This wheel charger features LED indicators and button controls for easy reading and accuracy. It can charge both a 6-volt and/or a 12-volt battery. At 6-volts, this wheel charger can charge at 2 amps (trickle) and 10 amps (standard). At 12-volts, it can charge at 2 amps (trickle), 10 amps (standard), 40 amps (quick charge) and 200 amps (Engine Start). Using the 200 amps emergency start setting is powerful enough to bring cars, large SUVs and small trucks back to life!
SPECIFICATIONS
ETL certified
Recessed control panel protects against accidental setting changes. Features LED indicators and button controls for easy reading and accuracy.
Voltage: 6-volts and 12-volts
Spark proof for safe operation
Operation: At 6-volts, this wheel charger can charge at 2 amps (trickle) and 10 amps (standard). At 12-volts, it can charge at 2 amps (trickle), 10 amps (standard), 40 amps (quick charge) and 200 amps (Engine Start).
Suitable for Absorbed Glass Mat (AGM), GEL and standard (STD) batteries
Automatic charge cycle functionality switches to float mode after fully charging the battery
Short circuit, overheat and reverse polarity protection will not operate if clamps are reversed
Easy to use! An error notification will light up if a bad connection is detected
Active Charging Indicator: Cycles between volts, amps and battery percent
Wheels: Rubber
GLOSSARY OF TERMS
ETL certified: This product is compliant with North American safety standards.
Absorbed Glass Mat (AGM) battery: Use a glass mat to absorb the electrolyte. These batteries are sealed (vs. flooded), resistant to vibration, non-spillable and maintenance-free.
GEL battery: Gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one-way valves to reduce gassing.
Light-emitting diode (LED): LED lights typically last longer than incandescent lights and are more efficient than most fluorescent lights.
View Details
|
F52755 |
Battery Charger, 6V at 2 and 10 AMPs / 12V at 2, 10, 40, and 200 AMPs Start |
Discontinued |
279.99 |
/ EA |
52755 |
|
